Milk Froth - Klarstein BARISTOMAT 10033138 Bedienungsanleitung

EN
30
Coffee
1 Put ground coffee powder (max.15g) in the coffee filter, close it and insert it
into the filter insert.
2 Close the cover of the filter insert. You will hear a click when the lid is properly
closed.
3 Press the COFFEE button to start preparation.
Cappuccino
1 Put ground coffee powder (max.15g) in the coffee filter, close it and insert it
into the filter insert.
2 Close the cover of the filter insert. You will hear a click when the lid is properly
closed.
3 Align the outlet of the frother with the inside of the cup.
4 Press the Capuccino button to start preparation.
Caffè Latte
The difference between cappuccino and caffè latte lies in the amount of milk foam
added to the drink and the preparation time.
1 Put ground coffee powder (max.15g) in the coffee filter, close it and insert it
into the filter insert.
2 Close the cover of the filter insert. You will hear a click when the lid is properly
closed.
3 Align the outlet of the frother with the inside of the cup.
4 Press the LATTE button to start preparation.

Milk froth

1 Place a cup on the drip grid.
2 Align the outlet of the frother with the inside of the cup.
3 Press the MILK FROTH button to start preparation.
Note: Let the filter insert cool down for a few seconds after preparing tea
beverages. There is always some hot water left in the tea filter after preparation.
To avoid accidental scalding, do not touch it.