Klarstein BARISTOMAT 10033138 Bedienungsanleitung Seite 25

14 Pour the water out of the cup. Do not drink the water used and created during
cleaning and do not use it for any other purpose.
Note: Allow the appliance to cool down for 15 minutes after each programme to
prevent the appliance from overheating.
15 Repeat steps 13-14 until the water and milk tanks are empty.
Note: The device will emit a permanent single error tone to indicate that the
water tank is empty.
16 Turn off the device and allow it to cool down completely before proceeding to
the next step.
17 Pour the pre-cleaning water out of the cup and drip tray.
18 Wipe the device dry with a clean cloth. Your device is now ready to be used for
the first time!
Note: If you are using milk for a preparation, clean the milk system of the device
after completing the preparation as described in CLEANING AND CARE in order
to keep the device functional.
EN
25