Carbon Filter - Pkm KH-60KHSX Bedienungsanleitung

1. Open the extractor hood using the « O
ALUMINIUM GREASE FILTERS
X
2. The
CARBON FILTERS
3. Place the

CARBON FILTER

tightened (s. fig. below).
A
M
B
C
ARBON FILTER
C
LOCKWISE ROTATION
C
and turn the filter clockwise until it is installed properly.
4. Repeat the procedure on the other side of the motor.
5. Reinstall the
ALUMINIUM GREASE FILTER
6. If you want to uninstall the
remove them.
WARNING! Install the carbon filters safely and properly; otherwise, the
carbon filters can loosen and cause hazardous situations.
H
OW TO INSTALL THE CARBON FILTERS
(s. fig. below).
B
UTTON FOR THE OPENING OF THE EXTRACTOR HOOD
are intended to be installed on both sides of the motor.
on the motor and turn it clockwise until it is firmly
Fig. similar: modifications are possible.
OTOR
CARBON FILTERS
» -
PEN BUTTON
= Place the
CARBON FILTER
( ).
S
, turn the filters anti-clockwise and
~ ~
52
(X) and remove the
s
on the motor