When Installing The Aerial Outside The Vehicle; When Routing The Lead In From The Top Of The Door; When Routing The Lead In From Inside The Boot - Pioneer AVIC-HD1BT Installationsanleitung

Installation
When installing the aerial outside the vehicle (on the body)
Put the GPS aerial in a position as level as possible, such as on the roof or boot lid. (The
GPS aerial is fastened with a magnet.)
GPS aerial

When routing the lead in from inside the boot

Clamps
Use clamps to secure the
lead where necessary inside
the vehicle.
Rubber packing
25
When routing the lead in from the top of the
door
Make a U-shaped loop in the lead
on the outside to prevent rainwater
from flowing along the lead into the
interior of the vehicle.
Clamps
Use clamps to secure
the lead where
necessary inside the
vehicle.
Waterproof pad
Make sure the waterproof pad
contacts the top of the rubber
packing.
Make a U-shaped loop in the
lead outside the rubber
packing to prevent rainwater
from flowing along the lead
into the interior of the vehicle.