Section
02
Connecting the system
When connecting to separately sold power amp
The navigation unit
Blue/white
Connect to system control terminal of the power amp or auto-aerial relay
control terminal
(max. 300 mA 12 V DC).
Notes
· You can change the RCA output of the subwoofer depending on your subwoofer system. (Refer to Operation
Manual.)
· If you set "Rear SP" to "Sub.W", you cannot conduct the setting of "Preout".
· Ensure the output setting of "Preout" is the same as the speaker connected.
10
Engb
Subwoofer or Rear
outputs
(SWL, SWR)
RCA cable
(sold separately)
System remote control
Left
Subwoofer or
Rear speaker
Right
Subwoofer or
Rear speaker
Power amp
(sold separately)