Connecting The System - Pioneer AVIC-F840BT Installationsanleitung

Section
02

Connecting the system

Connecting the system
The navigation unit
Wired remote input
Please refer to the
instruction manual
for the Hard-wired
remote control
adapter (sold
separately).
Vehicle aerial
8
Engb
Power cord
For connection, refer to the wiring and
installation manual separately supplied.
30 cm
Yellow/black
If you use an equipment with mute
function, connect that equipment to the
1 m
Audio Mute lead. If not, keep this lead free
of any connections.
30 cm
RDS-TMC tuner
13 cm
Aerial jack
Fuse (10 A)
Note
Audio source will be set to mute or attenuate, while the
following sounds will not be muted or attenuated. For details,
refer to Operation Manual.
— voice guidance of the navigation
— incoming ringtone and incoming voice of the mobile
phone that is connected to this navigation system via
Bluetooth wireless technology
Vehicle Bus adapter input
Please refer to the instruction
manual for the Vehicle Bus
adapter (sold separately).
RCA connector
15 cm