Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
14
ASSEMBlY
only install the windscreen de-icer if the vehicle has a 12-V on-board power
supply and the vehicle power socket is equipped with a minimum 15 A fuse.
Warning!
▪
Mortal danger! Do not mount the windscreen de-icer within the airbag
inflation area or in the head impact zone of people seated in the vehicle.
▪
Mortal danger! Do not mount the windscreen de-icer so that it impedes the
view of the driver in any way.
▪
Mortal danger! Do not mount the windscreen de-icer so that it can become
unattached during strong braking action or when negotiating tight curves.
▪
Danger of overheating! Select the mounting position so that the air inlet and
outlets cannot be blocked.
1. Select a suitable position in the vehicle to mount the unit and make sure that
it is dry and free from dust and fat.
2. remove the protective foil from the hook-and-loop-fasteners and attach the
fasteners to the base of the holder.
3. remove the other protective foil from the hook-and-loop-fasteners and
press the windscreen de-icer, together with the holder, onto the intended
mounting position.
4. lay the connector cable to the 12-V vehicle socket. lay it so that it does not
impede access to the pedals or steering wheel. Do not lay the cable over
sharp edges or hot areas.
You can also use the enclosed screws to affix the windscreen de-icer.
Make sure that you do not damage other cables or parts when you screw in
the screws or drill holes for them.
All manuals and user guides at all-guides.com
uSE
Notes pertaining to use
Please remember that the 12 V vehicle socket only works when the ignition is
switched on.
remove the vehicle [plug from the 12 V vehicle socket when not in use.
Always pull on the vehicle socket and never on the connection cable.
only use the windscreen de-icer for short periods when the vehicle motor is
not running. this prevents the battery from running down.
Use as heater or ventilator
1. insert the vehicle plug into the 12 V vehicle socket.
2. Swivel the windscreen de-icer to the desired position.
3. Switch on the windscreen de-icer:
Hand-held use
1. remove the windscreen de-icer from ist holder.
2. Fold out the handle.
3. Plug the unit into the 12 V vehicle socket.
4. Switch on the windscreen de-icer:
▪
Heat: Heater
▪
Fan: Fan
▪
Heat: Heater
▪
Fan: Fan
gB
15
Werbung
Inhaltsverzeichnis
