Installing The Router Motor On Ofl2.0-Ad43 - Sauter OFL-Serie Betriebsanleitung

7.2 Installing the router motor on OFL2.0-AD43 or ADAP43-OFL adapter
1)Turn the height adjustment
tallation plate (6) is at maximum distance from the insert plate. This will improve
access for installation.
2)Place the router lift on a secure surface
with the operating side facing downwards
so that the installation plate
upwards. Do not undo the installation plate
(6) screws.
3)Now hold the ADAP43-OFL adapter to the
installation plate if it has not already been
installed (see delivery scope of OFL2.0-
AD43). Subsequently select the intended
installation bores
screw on the adapter
purpose, also refer to the bore data in the
"Permissible routers and router motors"
section.
4)Subsequently insert the router motor into the adapter
router mount is pointing towards the insert plate
motor has been inserted by a minimum of 20 mm and that there is thus a positive
connection. Now tighten the adapter to the recommended torque of 13 Nm and regu-
larly check it is positioned correctly and securely.
(1) of the router lift counter-clockwise until the ins-
(6) points
(18) C and E and
(19). For this
View of attachment screws
(8), the clamping collar of the
Fig. 12 Installing the router motor
51
Fig. 11
(OFL2.0 as example)
(19). Make sure the
(OFL2.0 as example)