Installing Routers; Installing The Router On Ofl1.0, Ofl2.0, And Ofl2.0-Mini - Sauter OFL-Serie Betriebsanleitung

7. Installing routers

7.1 Installing the router on OFL1.0, OFL2.0, and OFL2.0-MINI

1) Turn the height adjustment (1) of the router lift counter-clockwise until the
installation plate (6) is at maximum distance from the insert plate.
Fig. 7 Router lift extended (OFL1.0 as example)
2)Place the router lift on a secure surface with
the operating side facing downwards so that the
installation plate (6) points upwards. Do not
undo the installation plate (6) screws.
3) Now place the router on the router lift. Select
the matching installation bores (5).
It may be necessary to unscrew the sliding plate
of the router before being able to start assembly.
In this process, make sure that the spindle is
positioned centrally in relation to the opening in
the installation plate (6). With some models
it is potentially necessary to unscrew the handles
and install the router diagonally on the installation
plate (6).
Fig. 8
Aligning the router
(OFL1.0 as example)
49