Concept VO2850 Bedienungsanleitung Seite 30

6. Select the normal or athlete mode using the arrows (Fig. 9) and confirm by
pushing the MODE button. A sound signal will be heard and the readiness
indicator displayed.
In case you want to store the data in the unit's memory, select the required memory
number using the arrows (Fig. 10) and push the MODE button. Occupied memory
is indicated by the symbol „
7. A sound signal will be heard and the memory storage indicator (M) and measuring
readiness indicator (R) will be displayed.
8. You can start to measure the body fat, water, muscle and bone mass.
ERASING PERSONAL DATA FROM THE MEMORY
1. Push the MODE button for 2 seconds when the unit is switched off.
2. The memory number and entered personal data will be alternately displayed.
3. Select the required memory number using the arrows.
4. Press both the arrows simultaneously. The selected memory will be erased.
BODY FAT, WATER, MUSCLE AND BONE MASS MEASURING FUNCTION
1. Push some of the arrows or the MODE button for 2 seconds when the unit is
switched off.
2. The memory number and entered personal data will be alternately displayed.
3. Select the required memory number using the arrows and confirm by pushing
the MODE button.. A sound signal will be heard and the memory storage
indicator (M) and measuring readiness indicator (R) will be displayed. Step on
the weighing surface barefoot; place your feet on the measuring electrodes
(Fig. 4). Make sure not to slide, or turn the unit over. The resulting weight will be
displayed (Fig. 5).
4. After a while the measurement of body fat and water will be displayed (Fig. 11).
To ensure a correct measuring the feet, shins and thighs shall not be in contact.
5. After measuring, the value of body fat will be displayed (body weight percentage,
Fig. 12), together with the value of water content (body weight percentage, Fig.
13), body muscle mass (body weight percentage, Fig. 14), and the bone mass
(body weight percentage, Fig. 15).
6. The unit will switch off automatically after a couple of seconds.
SWITCHING THE UNIT OFF
You can switch the unit off by pushing the MODE button for 2 seconds.
The unit will switch off automatically if you don't push any buttons for 10 seconds.
28
„.
EN
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
VO2850