Miele A 207 Gebrauchsanweisung Seite 36

en - Areas of application
Loading mesh
trays with
injector manifolds
36
Load mesh trays with injector manifolds upright in the mesh tray

carrier A 311. The water connections must point towards the in-
jector manifold on the mobile unit.
Load from the back to the front, and unload from the front to the
back.
The mesh trays must not be placed loosely in the mobile unit or
stacked on top of each other.
Connect the mesh trays to the silicone hoses on the A

207 mobile unit (the A 314 mesh tray is shown in the example here).
Secure the ends of any unused hoses in the perforated plate.

 Otherwise unused silicone hoses will be spun around by the
force of the water. This could cause damage to the load or to the
machine.
Unused hoses must not be sealed with stoppers.