Unit; Count; Function; Hold Mode - Baxtran Optima Bedienungsanleitung

3.2 UNIT

Press to choose the unit of weight: kg and g will be displayed in a cycle every time you press it.

3.3 COUNT

Long press to enter count mode. By pressing
average weight of 10, 20, 50, 100 the number of items, the more and the more accurate). Press
play. Place the selected number of samples on the plate and press
single item has been calculated and set. Now, the display will show the number of units on the platform. By adding more or removing some
of the items, will be reflected in the display through appropriate numbers.
To come back to normal mode, press

3.4 FUNCTION

3.4.1 AFTER STARTING AND SELF-CHECK, LONG PRESS
OFF mode
DNY mode

HOLD mode

ALAR mode
3.4.2 DNY MODE
Long press to enter setting, and press
sensitivity. Choose 1/2/3, press
on the right side of the panel.
In this mode, the sudden peaks and lows of a moving object are filtered to display a more stable value. It is commonly used in animal husban-
dry departments, such as weighing animals.
Other key functions are not affected.
When the dynamic measurement is stable, the buzzer gives a short sound, indicating the measurement is stable.
Dynamic weighing mode:
1 weak dynamic
2 Locking dynamics (no update after locking unless back to zero)
To come back to normal mode, press and hold
3.4.3 HOLD MODE
Long press to enter setting, and press
The mode is confirmed by function indicator light on the right side of the panel.
Other key functions are not affected.
In the open state, record the peak of the measured weight and keep it. The retained value is displayed when the subsequent measured value is
not greater than the retained value. When subsequent measurements exceed the current peak value, the new peak value is displayed and held.
To come back to normal mode, press and hold
12
, select the sample size that you want to measure for setting the reference value (the
and the scale will return to normal mode.
Turn OFF all other function modes
Dynamic measurement mode
Peak retention mode
Upper and lower limit mode
repeatedly until 2 DnY is displayed, Press
to confirm and enter the Dynamic weighing mode. The mode is confirmed by function indicator light
, 1Off will be displayed. Press
repeatedly until 3 hold is displayed, Press
, 1Off will be displayed. Press
to confirm. A double beep sound confirms the reference value of the
TO ENTER THE FUNCTION SELECTION:
2 strong dynamic
and the scale will return to normal mode.
and the scale will return to normal mode.
OPTIMA USERS GUIDE
. Now, Load-C will appear on the dis-
to move to the next step of selecting
to confirm entering peak retention mode.
EN EN