Installation; Parts; Filter Tank - COMFORTPOOL PRIME Sicherheitshinweise

2. Installation

Always install the filter pump at least 3.50 meters from the edge of the pool. The filter pump must be connected
to a grounded electrical network with an alternating current voltage of 230 V and 50 Hz and must be protected
by a differential switch (RCD) with a capacity of max. 30 mA.
2.1.

Parts

The filter pump consists of the following parts:
1. Pump
2. Valve
3. Seal (O-ring)
4. Clamping ring
5. Tank
6. Central pipe
7. Filter screen
8. Drain plug
9. Centralizer (cover for standpipe)
10. Base plate
11. Pressure hose
2.2.

Filter tank

▪
Insert the standpipe including the filter into the tank.
▪
Place the standpipe with filter on the bottom of the tank, making sure to place the
standpipe in the middle of the tank and that the drain plug is screwed in.
|
NL
18