Specifications; Pool Floor Cleaning - COMFORTPOOL PRIME Sicherheitshinweise

4. Specifications

All models: 7-way valve, filter pump TÜV/GS, Ø 32/38 mm connection, base plate.

5. Pool floor cleaning

The bottom cleaning is done in the "FILTER" mode. The pool vacuum must be connected with the pool
vacuum hose directly to the skimmer. The filter pump must be turned off until the pool vacuum cleaner is ready
for use.
Important: The pool vacuum hose must be completely filled with water so that no air gets into the filtration
system. Only then can the pump be switched on. When air enters the filter system, the filter pump must be
switched off and the vacuum cleaner must be re-primed.
Model
Pump flow rate
Connection
Amount of sand
Filter pump
Model
Pump flow rate
Connection
Amount of sand
Filter pump
Model
Pump flow rate
Connection
Amount of sand
Filter pump
Model
Pump flow rate
Connection
Amount of sand
Filter pump
PRIME 6
3
3,6 m /h at 0,4 bar working pressure
230 V, max. 200 W
max. 20 kg
Without prefilter, not self-priming
PRIME 7
3
4,5 m /h at 0,4 bar working pressure
230 V, max. 250 W
max. 20 kg
Prefilter, self-priming
PRIME 8.5
3
6,5 m /h at 0,4 bar working pressure
230 V, max. 450 W
max. 30 kg
Prefilter, self-priming
PRIME 10
3
8,0 m /h at 0,4 bar working pressure
230 V, max. 550 W
max. 68 kg
Prefilter, self-priming
|
NL
21