Setting And Visualisation Of The Set Point - Hayward SUMHEAT FULL INVERTER HP5171DT3 Einbau- & Anleitungshandbuch

4. USER INTERFACE (continued)

4.4 Setting and visualisation of the set point

In Mode "OFF" or Mode "ON"
Press the button
set the set point you wish.
Confirm by pressing
The setting is made with a precision of 0.5 °C.
It is recommended to never exceed 32°C to avoid alteration of the liners.
18
to display the set point, then press
and you will return to the main screen automatically.
or pour to