Fitting The Collar - Pettec Antibark Vibra Trainer 2.0 Bedienungsanleitung

Customizable vibration levels
The PetTec Antibark Vibra Trainer 2.0 features seven different
vibration and tone levels; level »1« is the weakest signal andlevel
»7« is the strongest. Both signals can also be turned off independ-
ently of each other by selecting level »0«. The suitable vibration or
tone level for your dog depends on his temperament and sensitivity to
vibration and sound. And so you should always start at the lowest
setting and work your way up until you find the correct level of
vibration and/or tone.
Your dog may show little reaction even after you've found the correct
level of vibration and/or tone. This may occur if his neck muscles are
tensed. If he does not notice the vibration and/or tone signal, you
should increase to a higher level.

Fitting the collar

The collar must be snugly fastened so that the vibration and/or
tone signals will be effective. You can ensure proper fit by checking
whether one or two fingers will fit under the collar. The best position
for the PetTec Antibark Vibra Trainer 2.0 is directly under the nose.
Please be careful that the collar is not too tight, but also that it does
not slip; otherwise the vibration and/or tone signals may not be
effective.
24