Pettec Antibark Vibra Trainer 2.0 Bedienungsanleitung Seite 27

Charging the Antibark Vibra Trainer 2.0
Completely charge the battery of the Antibark Vibra Trainer 2.0
using the USB charging cable, until the LED display shows »7«. If a
number between »0-6« appears, the battery is not fully charged.
Charging the Trainer:
•
Open the rubber cover on the underside of the Antibark Vibra
Trainer 2.0 and plug the USB charging cable into the jack.
•
Connect the USB connector to the adapter and plug the
charger into a power outlet.
•
A full charging cycle lasts about an hour, and the first charge
about two hours.
•
The Antibark Vibra Trainer 2.0 can be charged with a standard
USB charger. Or, the Antibark Vibra Trainer 2.0 can be charged
via the USB connection on a notebook, power bank, or similar
device.
27