Filling The Trainer; Attaching The Collar - Pettec Antibark Spray 2.0 Bedienungsanleitung

Filling the trainer

The Antibark Spray 2.0 must be switched off to fill with
spray. For this purpose, the filling nozzle must be placed
vertically on the filling valve. When the filling nozzle is
properly positioned, gently press and fill the trainer for
15 seconds.
Note: In order to completely empty the Antibark Spray 2.0
tank, you can easily press down the filling valve with a
screwdriver.
15 sec

Attaching the collar

The collar must be firmly attached so that the spray feedback can be applied effectively. You
can test the correct attachment of the collar by checking whether one or two fingers can
still fit beneath the collar. The prioritized position of the Antibark Spray 2.0 is right below
the snout of the dog.
Please take care that the collar is not too tight or the dog may experience difficulties
breathing. Likewise, the collar should not slip, otherwise the spray feedback may become
ineffective.
19