Herunterladen Inhalt Inhalt Diese Seite drucken

Power Cord - Pioneer SPH-T20BT Benutzerhandbuch

Smart-receiver
Vorschau ausblenden Andere Handbücher für SPH-T20BT:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 60

Power cord

To power cord input
Depending on the kind of vehicle,
the function of
and
may be
different. In this case, be sure to
connect
to
and
to .
Yellow
Back-up (or accessory)
Yellow
Connect to the constant 12 V
supply terminal.
Red
Accessory (or back-up)
Red
Connect to terminal controlled by
the ignition switch (12 V DC).
Connect leads of the same colour
to each other.
Black (chassis ground)
Blue/white
The pin position of the ISO
connector will differ depending
on the type of vehicle. Connect
and
when Pin 5 is an antenna
control type. In another type of
vehicle, never connect
and .
Blue/white
Connect to the system control
terminal of the power amp (max.
300 mA 12 V DC).
Blue/white
Connect to the auto-antenna
relay control terminal (max.
300 mA 12 V DC).
Speaker leads
White: Front left
White/black: Front left
Gray: Front right
Gray/black: Front right
Green: Rear left
Green/black: Rear left
Violet: Rear right
Violet/black: Rear right
Orange/white
Connect to a car's illumination
signal.
ISO connector
In some vehicles, the ISO
connector may be divided into
two. In this case, be sure to
connect to both connectors.
NOTES
• Change the initial menu of this
unit. Refer to [REAR-SP]. The
subwoofer output of this unit is
monaural.
• When using a subwoofer of 2 Ω,
be sure to connect the subwoofer
to the violet and violet/black
leads of this unit. Do not connect
anything to the green and green/
black leads.
Power amp (sold
separately)
Perform these connections when
using the optional amplifier.
System remote control
Connect to blue/white cable.
Power amp (sold separately)
Connect with RCA cables (sold
separately)
To rear output
Rear speaker
To front output
Front speaker
To subwoofer output
Subwoofer
Camera
About rear view camera
When you use the rear view camera,
the rear view image is automatically
switched from the video by moving
the gearstick to REVERSE (R).
Camera View mode also allows you
to check what is behind you while
driving.
WARNING
USE INPUT ONLY FOR REVERSE
OR MIRROR IMAGE REAR VIEW
CAMERA. OTHER USE MAY RESULT
IN INJURY OR DAMAGE.
CAUTION
• The screen image may appear
reversed.
• With the rear view camera you can
keep an eye on trailers, or back
into a tight parking spot. Do not
use for entertainment purposes.
• Objects in rear view may appear
closer or more distant than in
reality.
• The image area of full-screen
images displayed while backing
or checking the rear of the vehicle
may differ slightly.
En
13

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis