Pioneer SPH-T20BT Benutzerhandbuch Seite 17

Subwoofer/Low pass filter:
Frequency: 25 Hz/31.5 Hz/
40 Hz/50 Hz/63 Hz/80 Hz/
100 Hz/125 Hz/160 Hz/200 Hz/
250 Hz
Slope: –6 dB/oct, –12 dB/oct,
–18 dB/oct, –24 dB/oct,
–30 dB/oct, –36 dB/oct, OFF
Gain: +10 dB to –24 dB (1 dB step)
Phase: Normal/Reverse
Speaker level:
+10 dB to –24 dB (1 dB step)
Time alignment:
0 cm to 350 cm (2.5 cm/Step)
USB
USB standard specification:
USB 2.0 high speed
Maximum current supply: 1.5 A
USB Protocol:
MSC (Mass Storage Class)
File system: FAT12, FAT16, FAT32
FM tuner
Frequency range: 87.5 MHz to
108.0 MHz
Usable sensitivity: 11 dBf (1.0 μV/
75 Ω, mono, S/N: 30 dB)
Signal-to-noise ratio: 65 dB (IEC-A
network)
MW tuner
Frequency range: 531 kHz to
1 602 kHz
Usable sensitivity: 25 μV (S/N: 20 dB)
Signal-to-noise ratio: 60 dB (IEC-A
network)
LW tuner
Frequency range: 153 kHz to
281 kHz
Usable sensitivity: 28 μV (S/N: 20 dB)
Signal-to-noise ratio: 60 dB (IEC-A
network)
Bluetooth
Version: Bluetooth 4.0 certified
Output power: +4 dBm Max (Power
class 2)
Frequency band(s): 2 400 MHz to
2 483.5 MHz
Bluetooth profiles:
GAP (Generic Access Profile)
SDAP (Service Discovery
Application Profile)
HFP (Hands Free Profile) 1.6
PBAP (Phone Book Access
Profile)
A2DP (Advanced Audio
Distribution Profile)
AVRCP (Audio/Video Remote
Control Profile) 1.5
SPP (Serial Port Profile) 1.1
Video
Video (Input) format: NTSC, PAL
Input level: 1.0 V p-p/75 Ω
(±0.2 V)
Video (Output) format: NTSC
Output level: 1.0 V p-p/75 Ω
(±0.2 V)
NOTE
Specifications and the design are
subject to modifications without
notice.
17
En