Getting Started; Basic Operation - Pioneer SPH-T20BT Benutzerhandbuch

Getting Started

Basic operation

SPH-T20BT
Purpose
Reset the unit Press the reset button with a thin object
Adjust the volume Press +/–
Remove the tablet Push the button
NOTE
When exchanging the tablet (for example, when the tablet is broken or is
being exchanged for a new tablet, etc.), press the + and – buttons at the
same time for approximately 5 seconds to reset the settings.
Operation
Plugging a USB storage device
1
Plug a USB storage device into the USB cable.
NOTES
• This product may not achieve optimum performance with some USB
storage devices.
• Connection via a USB hub is not possible.
• A USB cable is required for connection.
USB Cable
USB storage device
Unplugging a USB storage device
1
Pull out the USB storage device from the USB cables.
NOTE
Check that no data is being accessed before pulling out the USB storage
device.
11
En