Operation; Switching The Kobold Vb100 Cordless Vacuum Cleaner On And Off; Setting The Suction Power Level - Kobold VB100 Gebrauchsanleitung

3

Operation

3.1 Switching the Kobold VB100
Cordless Vacuum Cleaner on
and off
1. Switch on the Kobold VB100 Cordless Vacuum Clea-
ner by pressing the main switch
2. To switch if off, press the main switch again.
3.2 Setting the suction power
level
The suction power level can be manually set using the
silver switch as follows:
LED display on han-
dle
One white LED is lit
on the handle.
Two white LEDs are
lit on the
handle.
Three white LEDs
are lit on the
handle.
Every time you switch on your cordless
vacuum cleaner, it will automatically start operating
on the 'med' suction power setting. The
electric brush will start in the mode that was
last selected (see chapter "3.3 Cleaning with the Kob-
old EBB100 Electric Brush" on page 20).
.
Suction power level
soft, minimum suction pow-
er
med, medium suction power
max, maximum suction
power
2
3
4
5
19