Inhaltsverzeichnis
Werbung
EN
GENERAL INSTALLATION CONDITIONS
• Before handling or connecting the equipment, please read this manual.
• Do not obstruct the equipment's ventilation system.
• Please allow air circulation around the equipment.
• Do not place the equipment near sources of heat or in excessively
moisture conditions.
• Do not place the equipment where it may be affected by strong
vibrations or knocks.
HOW TO USE THE EQUIPMENT SAFELY
• If any liquid or object falls inside the equipment, please contact a
specialized technician.
• Do not connect the equipment until all the other connections have been
made.
INSTRUCTIONS FOR THE OPTICAL CONNECTION
• For the optical connection, a single mode fibre cable is used with an SC/
APC-type connector.
All manuals and user guides at all-guides.com
• Remove the protective cover from the optical connector on the front
• Connect the cable to the device, carefully slotting the guides together for
PRECAUTIONARY MEASURES WITH THE CONNECTION POINT
• Take special care to avoid damaging the unprotected ends of the
connectors, as small scratches, impurities and/or particles of dirt, oil,
grease, sweat etc. may significantly affect the quality of the signal.
• To clean the ends of the connectors, gently rub with a lint-free lens
cleaning cloth, dampened using additive-free isopropyl alcohol. Make
sure the alcohol evaporates fully before connecting.
• Keep the connector covers and cable caps in a safe place in case they
• Always fit the covers on the connectors of devices that are not
connected to cables to prevent the laser beam from damaging the eyes.
panel of the device, and the cap on the connector of the single fibre
cable.
both connectors, pushing the connector all the way in.
are needed in the future.
5
Werbung
Inhaltsverzeichnis
