Maintenance And Care - STEINEL PROFESSIONAL HF 360-2 COM1 Bedienungsanleitung

shortest time is 5 minutes, the longest
time 20 minutes.
Pulse mode
The pulse function activates the output
for 2 seconds (e.g. for staircase lighting
time switches). The sensor will then be in
a dead time for 8 seconds.
Smart Remote app
To read off the sensor via smartphone or
tablet, you must download the STEINEL
Smart Remote app from your app store.
You will need a Bluetooth-capable smart-
phone or tablet.
Android
iOS
LED function
Initialisation: LED flashes blue.
Normal mode: LED OFF
Bluetooth connection active:
LED is flashes slowly in blue.
Test mode, movement:
LED permanently lights up green
Movement test mode no movement:
LED permanently lights up red
HF 360-2
Set detection reach. (Fig. 6.1/6.2/6.3)

7. Maintenance and care

The product requires no maintenance.
The sensor can be cleaned with a damp
cloth (without detergents) if dirty.
8. Disposal
Electrical and electronic equipment, acces-
sories and packaging must be recycled in
an environmentally compatible manner.
Do not dispose of electrical
and electronic equipment
as domestic waste.
EU countries only
Under the current European Directive on
Waste Electrical and Electronic Equip-
ment and its implementation in national
law, electrical and electronic equipment
no longer suitable for use must be
collected separately and recycled in an
environmentally compatible manner.
9. Conformity
STEINEL Vertrieb GmbH hereby declares
that the HF 360-2 COM1/COM2/BT IPD
radio equipment type conforms to
Directive 2014/53/EU. The full wording
of the EU Declaration of Conformity
is available for downloading from the
following Internet address: www.steinel.de
- 19 -
GB