Approved Accessories, Combination With Other Products; Product Marking / Ce; Cleaning, Care And Disinfection; Technical Data - Petermann alpha PM-4012 Gebrauchsanleitung

3.7 Approved accessories, combination with other products

Petermann transfer aids are part of a comprehensive aid product range, which are effective and back-friendly
for the user and comfortable and supportive for the patients. Additional Petermann products may be used
according to the situation and clinical picture. Ask our experts. We are happy to help you!

4 Product marking / CE

The Petermann Lifting Mat is a Class I Medical Device and meets the EU-Regulation 2017/745 of
the European Parliament and Council dated 05.04.2017 for medical devices, hereinafter called
MDR.
Petermann GmbH is certified in accordance with DIN EN ISO 13485 by TÜV Süd, Medical Devices -
Quality management systems applicable to the design and development, production and
distribution of aids for people of limited mobility.

5 Cleaning, care and disinfection

The product doesn't require any special maintenance. It can be machine washed at 60°C and dried at low
temperatures (45° – 50°C). The use of non-standard cleaning agents or bleaching agents, alcohols, fabric softeners
or other chemical laundry additives may lead to permanent deterioration of the product properties.
The inner reinforcing components must be removed!
When necessary, we recommend wipe disinfection with the product Trionic
information upon request). As alternatives to our proven disinfectant Trionic
disinfectants for wipe disinfection:
Mikrobac Tissues*
®

Mikrobac forte*
®

Bacillol 30 Foam
®

Bacillol 30 Tissues
®

When using products marked with an *, wipe down again using a water-soaked cloth after disinfection has been
completed, in order to remove residues and prevent build-up. For wipe disinfection, please be sure to always follow
the instructions provided by the manufacturer.
Always follow the care instructions on the label of every product as well as the information in the respective user
manual.

6 Technical Data

Item no. Material
PM-4012 Polyamide, latexfrei
PM-4016 Polyamide, latexfrei
, we can also recommend the following
®
Colour
red
red
14/29
(DGHM/VAH approval, further
®
Load-bearing capacity
200 kg
200 kg