Description
WARNING
22
The sinusoidal filter is suitable for use with
♦ grounded supply networks (TN and TT supply networks)
♦ non-grounded networks (IT supply networks)
The assignment of sinusoidal filters to the drive converters and
inverters can be taken from Table 3-1.
Always observe the correct sinusoidal filter-drive converter assignment
(see Table 3-1)!
Parameter P068 of the drive converter must be set to '1'!
If this is not observed, the sinusoidal filter will be destroyed!
Betriebsanleitung / Operating Instructions
6SE7087-6CX87-1FC0
Siemens AG
SIMOVERT MASTERDRIVES