Operation Of The "Delay" Switch - Fronius OPT/i WF R Installationsanleitung Ersatzteilliste

Operation of the
"Delay" switch
22
All manuals and user guides at all-guides.com
The sensor outputs a signal when it detects
the end of the wire. If the sensor then de-
tects the wire electrode again, the signal re-
mains on for a short period. The amount of
time the signal remains on depends on the
setting of the "Delay" switch:
- "Off" = normal signal duration
- "On" = signal duration extended by 10
ms (factory setting)