Herunterladen Diese Seite drucken

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Selection guide

General recommendations for HEATSTRIP
Ideal mounting height: 2.3m to 2.5m. Maximum is 2.7m in a fully protected/enclosed outdoor environment.
Ideal mounting location: ceiling mounted, directly above area to be heated (eg. above a table)
Minimum recommended heating capacity for various installations are: 400W/m
for protected outdoor areas, and 600W/m
vides satisfactory performance, Thermofilm strongly recommends using conservative coverage areas when speci-
fying how many heaters are required for each installation.
The table below outlines the maximum coverage of each HEATSTRIP
with direct overhead mounting at minimum installation height. For example, for an outdoor area that is protected from pre-
vailing winds by walls, café blinds etc, Model THE2400EUR will cover a maximum of 4.8m
cover a maximum of 6.4m
For angled wall mounting applications, the coverage is reduced by up to 40%.
MODEL
INDOOR PROTECTED (m
THE2400EUR
THE3200EUR
8
®
Elegance:
2
for exposed outdoor areas. To ensure the HEATSTRIP
2
.
2
)
OUTDOOR ENCLOSED (m
6
8
2
for indoor spot heating; 500W/m
®
Elegance model based on 2 different scenarios
2
and Model THE3200EUR will
2
)
OUTDOOR EXPOSED (m
4.8
6.4
2
®
Elegance pro-
2
)
4
5.3

Werbung

loading