Radiant Footprint - HEATSTRIP ELEGANCE Bedienungsanleitung

Radiant footprint

®
HEATSTRIP electric heaters produce radiant heat which heats objects rather than the air. Therefore, it is imperative that
objects to be heated (ie. people), are within
the direct radiant footprint of the heater.
The diagram to the right shows the radiant
®
footprint of HEATSTRIP Elegance and is an
approximate guide based on a fully enclosed
outdoor environment.
This diagram shows that the maximum heat
output is found directly under the heater, and
the temperature decreases as you move
away from the heater.
It highlights the importance of maintaining
recommended mounting heights, and if
possible, positioning the heater directly
above the area to be heated.
Note that the temperature is similar for all 3
models, regardless of the wattage however,
as the size increases and the length of the
unit increases, the radiant footprint will be
longer.
The below diagrams show the approximate
heating area for each model, based on both an indoor and outdoor enclosed environment, with direct overhead mounting.
The radiant footprint is reduced in angled and wall mounted installations.
THE2400EUR
THE2400EUR
THE3200EUR
THE3200EUR
7