Wall Controller W/ Remote Control - HEATSTRIP ELEGANCE Bedienungsanleitung

THE-R Operation Control with Remote
The THE-R is a custom designed and manufactured heater. It has been designed for ease of use and provide low running
cost of your heater. It provides both temperature control (allowing the user to turn the heater output up or down depending
on the ambient temperature and conditions) and a timer for automatic heater shut– off operation
When the heater is plugged in, press "power" on the remote, the power indicator light on the unit is lit, and then press the
function button. It provides both temperature control allowing the user to turn the heat output High or Low and a timer for
automatic heater operation, either 1, 2 or 4 hours.
THE-R Functions
The heater allows a combination of the multiple timer (1/2/4 hour) and heat outputs (High/Low). The default operation is
continuous operation at full temperature.
The timer function has four settings: 1 hour, 2 hours, 4 hours or constantly ON. This feature is ideal for applications such as
alfresco areas, restaurant dining, assembly line production etc. when continuous heat is not required. The timer also reduces
the likelihood of heaters being inadvertently left turned on.
Depending on the ambient temperature, there may be a requirement to adjust the heat. The controller has 2 settings: they are
High and Low.
Remote pairing
All units operate using the same remote control frequency, therefore, multiple heaters can be operated using a single
remote control.
The remote will function at distance of over 8m when used in a straight line. This distance reduces when used at an
angle.
Controller functionality, please refer to page 17.
17