Remote Control Operation - HEATSTRIP ELEGANCE Bedienungsanleitung

Remote Control Operation

Signal Transmitter
• To use the remote controller, aim the
transmitter to the heater. A line of sight
transmission is required for the unit to
function.
• The controller does not have a protection
rating. The controller must be kept away
from wet applications.
• The remote will function at distances of
over 8m when used in a straight line. This
distance reduces when used at an angle.
Automated Countdown Timer
• Press 1H to begin 1 hour automatic
shutdown.
• Press 2H to begin 2 hour automat-
ic shutdown.
• Press 4H to begin 4 hour automat-
ic shutdown.
REMOTE FUNCTIONS
ON-H Temperature High
ON-L Temperature Low
OFF
1H 1H Automatic Timer
2H 2H Automatic Timer
4H 4H Automatic Timer
18
Unit Off
Receiver
• Receiver is
located on
the heater.
Temperature Control Button
• Press ON-H temperature will be
adjusted to HIGH.
• Press ON-L temperature will be
adjusted to LOW.
OFF Button
• Press this button once to turn OFF
operation.
Battery
• AAA Battery required for operation.