Spot Heating Principle - HEATSTRIP ELEGANCE Bedienungsanleitung

Spot heating principle

In most outdoor or difficult-to-heat indoor applications, there are 2 options when calculating the size and quantity
of the heaters required.
Option 1 is to comfort heat the entire area based on the total dimensions of the space, regardless of whether the
entire area is being fully occupied.
Option 2 is to spot heat the high use areas, such as over outdoor tables, BBQ's, lounges, assembly lines or in-
door workstations.
Often it is more practical and efficient to spot heat high use areas. Spot heating will reduce both the initial capital
cost as well as the ongoing running costs. Spot heating will allow the area to be "zoned", meaning only the areas
that are being used are heated, such as tables in a restaurant or outdoor alfresco area.
Option 1 and 2 show a comparison between heating an entire area or spot heating over a table.
®
The bottom layout shows the flexibility of using HEATSTRIP to provide a comfortable environment, even when
the layout of the area is very unusual.
Option 1: 6 x THE2400R 6 x THH2400 Option 2: 2 x THE2400R 2 x THH2400
BBQ
BAR
BAR STOOLS
LOUNGE
DINING TABLE
6