Updating The Firmware; Cleaning - Smart 4 Energy Smart Energy Monitor Benutzerhandbuch

10. UPDATING THE FIRMWARE

Firmware in the Smart Energy Monitor is updated by an automatic update once you have
connected your device to your network. Further information is available at:
www.smart4energy.com

11. CLEANING

Danger of electric shock!
WARNING:
No liquid may penetrate the device. Never clean it with a wet cloth. Pull
all plugs before cleaning.
WARNING:
Do not use any cleaning agents which contain solvents such as petrol or
thinner. These agents may damage the surface of the enclosure.
· Do not use any cleaning agents which contain solvents such as petrol or thinner.
These agents may damage the surface of the enclosure.
· Clean the enclosure and the display using a soft fibre-free cloth. For more stubborn
dirt, a mild solvent-free soapy solution or spirit may be used.
· The membrane keypad should be cleaned using a soft fibre-free cloth. No solvents
may be used here.
Monitor
26
Monitor