Installation; Installation On Din Top-Hat Rail; Wall Installation - Smart 4 Energy Smart Energy Monitor Benutzerhandbuch

6. INSTALLATION

6.1

Installation on DIN top-hat rail

Position the device on the top-hat rail as
shown in the illustration.
The device should be mounted ideally always in an appropriate installation housing!
6.2

Wall installation

The Smart Energy Monitor can be installed on
the wall using the integrated top-hat
retaining clip as shown on the illustration.
However, we recommend
installation of the Smart Energy Monitor be
made on a separate DIN rail. (6.1)
The device should be mounted ideally always in an appropriate installation housing!
Monitor
Fix the device using the top-hat rail
retaining clip.
rail
that the wall
12
Monitor