sportplus SP-INV-010 Bedienungsanleitung Seite 29

Step 3: Back- and head rest assembly to base frame
14
47
• Attach the backrest pad (47) and the head pad (48) to the assembled base frame
unit. Use 4 bolts (29), 4 washers (19) and 4 nuts (21).
• Insert incline adjustment bolt (14) into one of the the foreseen holes to limit
inclination to the desired angle and tighten.
• Tighten all bolts.
• Note: The rotating plates must face down when attaching the back rest support
frame or the unit will not invert properly.
21
29
19
21
19
2
29
29
19
29
21
21