Herunterladen Inhalt Inhalt Diese Seite drucken

Stihl MH 700 Gebrauchsanleitung Seite 48

Vorschau ausblenden Andere Handbücher für MH 700:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
English
1 Throttle lever
The throttle lever is used to adjust the engine speed.
2 Gear lever
The gear lever is used to set the gears.
3 Handlebar
The handlebar is used to hold, guide and transport the
tiller.
4 Cover
The cover protects the engine.
5 Oil bath air filter
The oil bath air filter filters the air taken in by the engine.
6 Headlamp
The headlamp illuminates the working area.
7 Starter handle
The starter handle is used to start the engine.
8 Transport handle
The transport handle is used to carry the tiller.
9 Hoe
The hoes till the ground.
10 Front wheel
The front wheel is used to transport the tiller.
11 Gearbox housing
The gearbox housing covers the gearbox.
12 Engine oil cap
The engine oil cap seals the opening for adding engine
oil.
13 Folding retainer
The folding retainer secures the hoe.
14 Blade spur
The blade spur is used to regulate the working speed and
working depth.
15 Gearbox oil cap
The gearbox oil cap seals the opening for adding
gearbox oil.
46
16 Clutch lever for self-propulsion
The clutch lever for self-propulsion engages and
disengages the drive shaft.
17 Clutch lever for lateral adjustment
The clutch lever for lateral adjustment is used to adjust
the handlebar laterally.
18 Handle
The handles are used to operate, hold and guide the
tiller.
19 Main switch
The main switch is used to start and stop the engine.
20 Light switch
The light switch is used to switch the headlamp on and
off.
21 Lever
The lever is used to set the handlebar height.
22 Clutch lever for reverse gear
The clutch lever for reverse gear engages and
disengages the drive shaft.
23 Fuel tank cap
The fuel tank cap seals the opening for adding petrol.
24 Guard
The guard protects the user from objects thrown up by
the machine and from contact with the hoes.
25 Cover
The cover protects the PTO.
26 Blade spur fastening
The blade spur fastening consists of a pin and retaining
pin and secures the blade spur.
27 Screw plug
The screw plug seals the opening for draining the
gearbox oil.
28 Spark plug
The spark plug ignites the fuel in the engine.
3 Overview
0478-404-9804-A

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis