Geberit ACO 202 Betriebsanleitung Seite 27

Fault
Red LED lights up
Pressing tool stops and no
LED lights up
Red and green LEDs flash
alternately
1) The addresses of authorised repair shops can be requested from the Geberit sales companies or found
at www.geberit.com
Troubleshooting after the pressing sequence
Fault
Green LED flashes
B971-003 © 06-2015
965.598.00.0 (02)
Cause
Pressing tool is
overloaded. Non-
permissible pressing
systems were processed
Pressing tool is defective
Rechargeable battery is
defective
Maintenance interval has
been reached
Cause
Rechargeable battery not
charged up sufficiently
Actions
Release start button.
Press unlocking button
Only process permissible
pressing systems
Repeat the pressing operation
Press unlocking button
Press the start button
If this is not successful, send the
pressing tool to a repair shop for
1)
testing
Release start button
Replace the rechargeable
battery and have it examined by
a skilled person
Press unlocking button: roller
drive moves to its starting
position
Repeat the pressing operation
Send the pressing tool to an
authorised repair shop for
1)
testing
Actions
Charge the rechargeable battery
or replace it
EN
27