Eliminating Malfunctions; Rectifying Malfunctions In Transport To The Shot Channel - Prebena PKT-8-PR100 Originalbetriebsanleitung

Eliminating malfunctions

Rectifying malfunctions in transport to the shot
channel
If there is a malfunction moving nails from the magazine to the shot
channel, follow these steps:
▶ Vent the tool.
▶ Turn off the tool.
▶ Remove the rechargeable battery.
▶ Remove the magazine.
▶ Remove jammed nails and any other foreign objects from the shot
channel and/or magazine.
If this measure does not eliminate the malfunction, contact the
manufacturer's Customer Service.
WARNING
Severe or fatal injuries are possible when operating
a damaged or malfunctioning fastener driving tool.
▶ Empty the magazine.
▶ Do not use the fastener driving tool again until
the malfunction has been eliminated.
ATTENTION!
The fastener driving tool can be damaged if repairs
are made by unauthorized persons.
▶ Always have repairs to the fastener driving tool
made by the manufacturer.
Eliminating malfunctions
65