Transporting The Fastener Driving Tool - Prebena PKT-8-PR100 Originalbetriebsanleitung

Transport and storage
▶ Place the compressed air cartridge, fastener driving tool,
rechargeable batteries and battery charging station in the
transport case as shown above.
▶ Close the transport case.

Transporting the fastener driving tool

The type of transport determines whether you are transporting the
fastener driving tool over short or long distances.
Short distances
Short distances are no longer than 10 meters in length.
Long distances
The following distances are considered "long distances" for
transporting the fastener driving tool:
• Distances longer than 10 m,
• Distances that lead over an uncertain subsurface,
• Distances that must be covered in an unusual body position.
Transporting the fastener driving tool over short distances
▶ Turn off the tool.
▶ Carry the fastener driving tool by the handle with the tool tip
pointing at the floor.
Transporting the fastener driving tool over long distances
▶ Turn off the tool.
▶ Remove the rechargeable battery.
▶ Pack the fastener driving tool in the transport case included with
delivery.
▶ Carry the transport case by the handle to the desired operating
location.
▶ Do not unpack the fastener driving tool until you reach the
location where it will be used.
60