Cleaning And Maintenance; Cleaning - Prebena PKT-8-PR100 Originalbetriebsanleitung

Cleaning and maintenance

Cleaning and maintenance

Cleaning

Carry out the following activities before cleaning work:
▶ Turn off the tool.
▶ Remove the rechargeable battery.
▶ Remove the magazine.
▶ Vent the tool.
Removing dirt and foreign objects
Dirt and foreign objects may settle on the tool, especially on movable
parts and exposed interfaces. They can lead to malfunctions and
must be removed immediately.
Parts of the tool to keep clean
The following parts of the tool in particular must always be kept free
of dirt and foreign objects:
• Exhaust air opening and air intake opening
• Thread for the cartridge and the protective plug
• Magazine
• Thumbscrew and fastening bolt for the magazine
• Tool tip with imprint protection
• Battery interface (on the tool and on the battery)
• Shot channel (see diagram below, item 1)
62
WARNING
Accidental triggering may result in severe or fatal
injuries.
▶ Do not point the fastener driving tool at people
or animals.
▶ Always empty the magazine before working on
the fastener driving tool.