Specifications - Makita 9557HNR Betriebsanleitung

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Wheel diameter
Max. wheel thickness
Spindle thread
Rated speed (n)
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Sound pressure level (L
Sound power level (L ) : 97 dB (A)
WA
Uncertainty (K) : 3 dB(A)
WARNING:
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model 9557HNR
Work mode: surface grinding
Vibration emission (a
h, AG
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
h, DS
Uncertainty (K) : 1.5 m/s
Model 9558HNR
Work mode: surface grinding
Vibration emission (a
h, AG
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
h, DS
Uncertainty (K) : 1.5 m/s
) : 86 dB(A)
pA
2
) : 7.5 m/s
2
2
) : 2.5 m/s or less
2
2
) : 8.5 m/s
2
2
) : 2.5 m/s or less
2
9557HNR
115mm (4-1/2")
M14 or 5/8" (country specific)
2.0kg
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
WARNING:
The declared vibration emission
value is used for main applications of the power tool.
However if the power tool is used for other applica-
tions, the vibration emission value may be different.
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
General power tool safety warnings
WARNING:
Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
5 ENGLISH
9558HNR
125mm (5")
7.2mm
-1
11,000min
271mm
2.1kg
/II