DJI Intelligent Battery Station Bedienungsanleitung Seite 9

T30 Intelligent Battery Station: T10 Intelligent Battery Station:
3. Attach the panel and secure using the screws.
Activation
The battery station requires activation before using for the first time. If the warning indicator is solid
green, it means the battery station has not been activated. Follow the steps below to activate the
battery station:
Method 1: Using the DJI MG App or DJI Agras App
1. Connect the battery station to a power outlet.
2. Connect the battery station to the remote controller using a USB-C cable.
3. Press the power button to power on the battery station.
4. Run the app and follow the prompts to finish activation.
Method 2: Using DJI Assistant 2 for MG
1. Connect the battery station to a power outlet.
2. Connect the battery station to the PC using a USB-C cable.
3. Visit www.dji.com to download DJI Assistant 2 for MG. Install and run the software.
4. Press the power button to power on the battery station.
©
2021 DJI All Rights Reserved. 7