DJI Mavic 2 Bedienungsanleitung

Disclaimer:
Thank you for choosing charger. Please read this user manual carefully before use.
The first use of this charger is seen as the recognition and acceptance for the whole
disclaimer. Please comply with this user manual strictly and pay attention to the
precautions. The company shall not be liable for any damages caused by users
improper use(such as short circuit, overheat, entry of foreign bodies or improper
touch on the terminal by hands or mental etc.)
Introduction:
This product could make fast charging on 3 drone batteries
with 17.6V; This product has full charge mode and storage mode; this
product features the function
adjustment;With the protection for over-voltage,
overcharge and balance.
How to use the charger:
O
LED
DC 5V 3A
of charging current manual
over-current,
Switch
"O"---turn off
"I" ---turn on
DC 17.6V 4A
17.6 V
Attentions:
1.Please place the charger steady while charging and do not cover anything on
the surface to ensure efficient heat radiation.
2.When the battery is above 90%, it may not charge automatically when
connected. 3.Automated prohibition for charging when the used battery is very
hot in a short time. The fourth LED light glitters for alarm. Pls charge it after being
cold.
4.With smart management, the built-in fan wont work when in low current or
the temperature is less than 45℃.
5. When the room temperature
and charging is prohibited.
battery charging in the environment of temperature 8-40℃ .
6.It is forbidden to charge the battery with a damaged surface to avoid the
fire caused by a short circuit of the battery.
7.Incorrect use of the charger may result in electric shock.
marked
8.his product is for indoor use only, please do not expose it to rain or snow.
overheat,
Specification:
Temperature for charging
is lower than 7℃, battery will be protected
If 2nd lamp on the battery flashes, please place the
Input
Output 1
Output 2
7-40
AC 100-240V
DC 17.6V 4A*3(211.2W)
USB-A DC 5V3A