Inhaltsverzeichnis
Werbung
5. Use your DJI account to log in and click "Battery Station / Inverter Generator" and follow the
prompts to finish activation.
Make sure the PC or smart device is connected to the internet during activation.
Internet
Using the Battery Station
Up to two batteries can be connected to the T30/T10 Intelligent Battery Station. Follow the
instructions below to use the battery station.
1. Connect the battery station to a power outlet.
When using the T30 Intelligent Battery Station, each AC power cable must be connected to
a separate AC power outlet or power strip with a rated current of more than 16 A.
2. Connect the battery to the battery station.
When using the T30 Intelligent Battery Station indoors, it is recommended to use only one
AC power cable, which reduces the maximum output power by half.
Make sure to place the charging battery on the same side that the charging cable is fixed
to the battery station.
©
8
2021 DJI All Rights Reserved.
> 16 A
> 16 A
Werbung
Inhaltsverzeichnis
