Changing The Door Hinges - hanseatic HTF14155FW Gebrauchsanleitung

Page EN-24

Changing the door hinges

Changing the door hinges
Depending on the space conditions, you can
change the direction of the door hinges on
your appliance. This work, however, requires
you to have a certain degree of craftsmanship
skills. Please read the following steps com-
pletely before commencing work.
In addition to the package contents, you will
need:
– a medium sized cross-slotted screwdriver;
– a small flat-headed screwdriver;
– a size 8 and size 10 spanner;
– pliers.
1. Disconnect the mains plug from the socket.
(14)
(15)
2. Lever out the cover cap (13) and the blind
cap (14) using a flat-headed screwdriver,
and remove them.
3. Remove the blind plug (15).
4. Unscrew the screws (16) using an 8
mm spanner and remove the upper
hinge (17).
5. Open the freezer door (18), remove it and
place it to one side.
(13)
(16)
(17)
(18)
(22)
(20)
(19)
6. Unscrew the screws (19) of the middle
hinge (20) using a cross-slotted screw-
driver.
7. Take out the hinge together with the two
plastic discs (21) and the plastic interme-
diate layer (22).
(24)
8. Open the fridge door (23), remove it and
place it to one side.
9. Tilt the unit slightly backwards against a
wall so that the lower hinge (24) is ac-
cessible.
10. Remove the screw feet (5) on both
sides.
11. Unscrew the hinge (24).
(21)
(23)
(24)
(5)