Troubleshooting - Lupine PIKO TL Bedienungsanleitung

Product care and storage
Cleaning:
Only clean the light with closed charging socket. If required, use warm water and add some dishwa-
shing detergent. After cleaning, open the charging socket in order to make it possible to dry out, just
in case water has entered.
Transport:
Attention! When transporting in a backpack or suitcase, activate the double click
function to prevent the lamp is started accidentally.
The uncontrolled heat buildup could cause a fire or melt adjacent plastic material.
Storage:
When the lamp will not be used for a longer period, fully charge the battery and store it at a cold place
(basement etc.). You can also leave it connected to the charger.
24
Problem: Ursache:
The light does not come on  Deep discharged battery
and the button's LEDs do
not flash.
The power LEDs do not come  Faulty LED unit
on, the button's LEDs flash.
The battery life is too short.  Discharged battery
 Very low temperatures
 Faulty charger
The light does only work if  Police mode enabled
I keep the button pressed.

Troubleshooting

Solution:
 Charge the battery
 Replace the LED unit
 Charge the battery
 Replace the battery
 Keep the battery warm
 Replace the charger
 see page 27
25