Exsys EX-6112 Anleitung Seite 19

EX-6112 English
6. VCOM Admin Utility
Please check if the COM-Ports has been added in the device manager! The following entry's
should now be visible in the device manager:
3. Changing the settings of the serial interface: If you change the settings of the serial interface
to values other than the default values (e.g. Device Description, Password, ...), you must first log in
to the Device Server (the default password for this is "system").
Click Remote Device Management > Login
© Copyright 2021 by EXSYS Vertriebs GmbH. All Rights Reserved
19