Selecting the level display
You can select the level display according to your preference.
When shipped from the factory, "VOL 2" is selected.
VOL 1: Shows the volume level indicator and the equalization pattern indicator.
VOL 2: Alternates "VOL 1" setting and illumination display.
OFF:
Erase the volume level indicator and the equalization pattern indicator.
3 1,4 2
1
2
3
4
28
Volume level indicator
Press and hold SEL for more than 2 seconds
to call up the general setting mode (see page
29).
Select "LEVEL" if not shown on the display.
Select the desired mode — "VOL 1", "VOL 2"
or "OFF".
Finish the setting.
Equalization pattern indicator