Cutting - Volpi KV360 Handbuch

14. Cutting

Wear suitable work clothes such as boots
with non-slip soles, sturdy long trousers,
gloves and goggles.
Wear protection gloves
Wear eye protection
•
When ready to cut, place the blade on the branch to be cut and press the trigger;
•
When operating the tool, keep the other hand and any other part of your body at a minimum
distance of 15cm from the blade;
•
Keep all other people at a minimum distance of 1.5m
•
Blade will be hurt or jammed if cutting bigger branch
•
Do not move the tool during the pruning shear cutting, it can cause danger.
•
Do not use the device in rain or humidity environment.
•
If the pruners stop working during long term use and you hear 4 fast beeps, this is an indication of
undervoltage protection which means the battery is depleted. Please charge as soon as possible.
•
Switch off the device after use and remove the battery from the pruner.
•
If no operation for 10 minutes, the pruner switches off automatically.
Caution: please check battery charge level or blade sharpening when cutting is difficult
or not smooth.
36
Risk of cutting and severe injuries
Warning!
In particular situations of very hard use, the
blade and the handle could reach high
temperatures. It is recommended to handle the
pruner with care, using protective gloves.
forcedly.