Automatic Ice Maker; Ice Making - Sharp SJ-WX830A Bedienungsanleitung

Automatic ice maker

Description
Noise-prevention sheet
To turn down the dropping sound of ice cubes.
Do not throw away this sheet.
Water supply
• Water is sent from the
water tank to the ice tray.

Ice making

• Ice cubes are made.
• The number of ice cubes
per cycle may
sometimes
change.
Releasing
• Ice tray rotates to
release the ice cubes
and returns to "Water
supply".
• The ice tray doesn't
rotates when the ice
storage box is full.
Upper limit temperature
Ice tray is located at
the upper section in the
back.
When you pull the ice
storage box, it leans
slightly and ice cubes
come to the front part of
the box.
Stored ice cube volume
Normal size ice
Large size ice
Shovel
<Refrigerator>
Water tank
Pump
Pipe
Ice tray
Detection
lever
Ice storage
box
<Freezer>
The volume of ice cubes are
checked periodically by this lever.
Detection
lever
Full volume
The volume of ice cubes may
decrease if they are not smoothed.
Ice making
You can choose 2 sizes as shown below.
Note
• The ice making time as shown above is only a rough
indication at the ambient temperature of 30°C,
temperature adjustment set to the initial setting
•
setting.
1
Press enter key.
2
Press icon.
3
Press icon again.
• The size of ice cube switches in the order by
pressing the icon.
→
4
Press enter key.
Approx. 2 hours
Approx. 3.5 hours
Current setting
Current setting
The setting is
changed.
shows normal ice.)
→
EN-14